Are you ready to create a cozy and comfortable DIY Tied Fleece Blanket? If yes, then let’s get started!
Introduction to DIY Tied Fleece Blanket:
A tied fleece blanket is a perfect addition to any home. It’s soft, warm, and can be personalized to match your style. Plus, making one yourself allows you to customize the size and material to fit your needs. In this guide, we will show you how to make a tied fleece blanket step-by-step.
Materials and Tools Required for Making a Tied Fleece Blanket:
Before we start, let’s take a look at what materials and tools you will need to make your own tied fleece blanket:
Two layers of fleece fabric (same size)
Scissors or rotary cutter
Pins
Sewing machine (optional)
Thread
Step-by-Step Guide on How to Make a Tied Fleece Blanket:
Now that you have all the necessary supplies, it’s time to begin making your DIY tied fleece blanket. Follow these steps:
1. Lay out both pieces of fleece fabric so they are facing each other.
2. Pin the two layers together along the edges, leaving about an inch unpinned.
3. Cut off the excess fabric from around the pinned area. This will help reduce bulk when tying the blanket later.
4. Using a sewing machine or needle and thread, stitch around the entire perimeter of the blanket, leaving a gap of about three inches. Leave the ends open as well.
5. Turn the blanket inside out through the opening. Use a chopstick or dowel to push out the corners and ensure they are fully turned.
6. Once the blanket is completely turned inside out, use a whip stitch to close up the remaining opening.
7. Now comes the fun part – tie the blanket into knots! Start by folding the top edge down towards the bottom edge, creating a ruffle effect. Then, tie a simple knot every few inches along the length of the blanket. You can adjust the spacing of the knots based on your preference.
8. Finally, trim any loose threads and voila! Your DIY tied fleece blanket is complete.
Care Instructions for Your Homemade Fleece Blanket:
To keep your new homemade fleece blanket looking its best, follow these care instructions:
Wash with cold water and mild detergent. Avoid using bleach or harsh chemicals.
Dry on low heat or hang dry. Do not put in the dryer with items that have zippers or buttons as they may snag the fabric.
Iron on low heat if needed. Be sure to turn the blanket inside out first to protect the knotted areas.
That’s it! With just a little bit of effort, you too can create a beautiful and cozy DIY tied fleece blanket.
