Have you ever looked at your old blanket and thought it could use an upgrade? Or maybe you have a favorite blanket that’s seen better days but can’t bear to part with it. Well, we have good news for you! With just a few simple steps, you can transform your old blanket into a beautiful fleece masterpiece that will keep you warm and cozy all winter long. Here are the easy instructions:
How to Make a Fleece Tie Blanket
1. Start by laying out your old blanket flat on a table or other surface. If necessary, trim any frayed edges or remove any stains before proceeding.
2. Next, measure the dimensions of your blanket and cut two pieces of fleece fabric to those same measurements. You can choose any color or pattern you like; fleece comes in so many fun options these days!
3. Place one piece of fleece on top of the old blanket, right side up (meaning the pretty side facing up). Then place the second piece of fleece on top of the first, also right side up.
4. Pin the layers together along each edge, making sure they line up perfectly.
5. Using a sewing machine or needle and thread, sew around the entire perimeter of the blanket, leaving about a 6-inch opening for turning. Be sure to backstitch at the beginning and end of your seam to secure it.
6. Turn the blanket inside out through the opening, pushing out any corners or wrinkles as you go.
7. Once the blanket is completely turned inside out, pin the opening closed and iron the whole thing flat.
8. Finally, using a sharp pair of scissors, trim off any excess fabric from the sides and bottom of the blanket, leaving a clean, finished edge.
Congratulations – you now have a brand new fleece tie blanket that’s perfect for snuggling under this winter!
How to Wash Fleece Blanket
Fleece is known for being soft and cozy, but it can also be delicate and prone to pilling if not cared for properly. To wash your fleece blanket, follow these tips:
1. Check the care label on your blanket to make sure it’s safe to wash in the washing machine. Some fleeces may require hand-washing or dry cleaning.
2. If your blanket is safe to wash in the machine, turn it inside out and put it in a mesh laundry bag or pillowcase to protect it from getting tangled or damaged during the cycle.
3. Use a mild detergent that’s safe for use on fabrics, such as baby shampoo or a gentle cycle setting on your washer. Avoid harsh detergents or bleach, which can cause damage to the fibers over time.
4. Set your washer to the gentlest cycle possible, such as delicate or wool, and wash your blanket alone to avoid any chance of snagging or stretching.
5. After the wash cycle has completed, take your blanket out promptly and gently squeeze out any excess water. Do NOT twist or wring the blanket, as this can cause damage.
6. Reshape your blanket and lay it flat on a towel to air dry. Do not hang it up or expose it to direct heat, as this can cause shrinking or felting.
Your fleece blanket should now be nice and fresh again, ready for another season of keeping you warm and comfortable.
How to Make a Fleece Blanket
If you don’t already have an old blanket lying around that you want to repurpose, you can still create a beautiful fleece blanket from scratch! Here’s how:
1. Choose two coordinating colors of fleece fabric and cut them to the size you desire for your blanket. For example, a queen-size bed might require two pieces measuring approximately 90 inches x 90 inches.
2. Lay one piece of fleece down on a flat surface, right side up. Place the second piece of fleece on top of the first, also right side up.
3. Pin the layers together along each edge, making sure they line up perfectly.
4. Using a sewing machine or needle and thread, sew around the entire perimeter of the blanket, leaving about a 6-inch opening for turning. Be sure to backstitch at the beginning and end of your seam to secure it.
5. Turn the blanket inside out through the opening, pushing out any corners or wrinkles as you go.
6. Once the blanket is completely turned inside out, pin the opening closed and iron the whole thing flat.
7. Finally, using a sharp pair of scissors, trim off any excess fabric from the sides and bottom of the blanket, leaving a clean, finished edge.
Voila! You now have a lovely new fleece blanket to curl up with on chilly nights.
How to Make a Tied Fleece Blanket
A tied fleece blanket is a great option if you prefer a more rustic look or want something extra cozy and plush. Here’s how to make one:
1. Begin by choosing two different colors of fleece fabric and cutting them to the desired size for your blanket. Again, a queen-size bed might require two pieces measuring approximately 90 inches x 90 inches.
2. Lay one piece of fleece down on a flat surface, right side up. Place the second piece of fleece on top of the first, also right side up.
3. Pin the layers together along each edge, making sure they line up perfectly.
4. Using a sewing machine or needle and thread, sew around the entire perimeter of the blanket, leaving about a 6-inch opening for turning. Be sure to backstitch at the beginning and end of your seam to secure it.
5. Turn the blanket inside out through the opening, pushing out any corners or wrinkles as you go.
6. Once the blanket is completely turned inside out, pin the opening closed and iron the whole thing flat.
7. Now comes the fun part – tying the blanket! Simply fold the blanket in half lengthwise, then fold it again widthwise until it resembles a large burrito. Secure the center with rubber bands or string, then begin tying the ends of the blanket in knots, spacing them evenly apart. Don’t worry too much about symmetry – the more haphazard the knotting looks, the more charming your final product will be!
8. Finally, using a sharp pair of scissors, trim off any excess fabric from the sides and bottom of the blanket, leaving a clean, finished edge.
You now have a unique and cozy tied fleece blanket that’s perfect for snuggling under this winter.
